Specification

LD pumped all-solid-state blue laser

All solid state 457nm blue laser is made features of ultra compact, long lifetime and easy operating, which is used in fluorescence sensors, Raman spectrum, laser printing, holography, laser display, submarine communication, biomedicine, laser lighting show, etc.

Model MBL-W-457A MBL-W-457-Water
Wavelength (nm) 457±1
Operating mode CW
Output power (W) >1, 2, …, 3 >4, 4.5, …, 5 >1, 2, …, 5
Power stability (rms, over 4 hours) <3%, <2%, <1% <2%, <1%, <0.5%
Transverse mode TEM00 Near TEM00 TEM00
M² factor <1.2 <5.0 <1.2
Beam divergence, full angle (mrad) ~1.0 ~1.5 ~1.0
Beam diameter at the aperture (1/e 2 , mm) ~2.0 ~3.0 ~2.0
Warm-up time (minutes) <10
Polarization ratio >50:1(>100:1 optional)
Cooled method Air Cooled Water Cooled
Beam height from base plate (mm) 80 85
Operating temperature (℃) 20~30 10~35
Power supply (100-240VAC) PSU-W-LED/PSU-W-FDA
TTL / Analog modulation TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional
Expected lifetime (hours) 10000
Warranty period 1 year
Options Linear power regulation 0-100% with constant beam quality. Part number: MBL-W-457A-HQ/MBL-W-457-Water-HQ.
Wavelength (nm) 266±1 355±1
Output power (W) 1~5W@1MHz 1W~4W 1W~3W 1~30W@1MHz 1W~8W 1W~5W
Rep.rate(MHz) 400KHz~2MHz 80MHz±1 120MHz±1 400KHz~2MHz 80MHz±1 120MHz±1
Pulse duration(ps) <10 <10
Power stability (rms,over 4 hours ) <3%, <1% <3%, <1%
Peak-to-Peak stability ( rms ,over 4 hours) ＜2 % ＜2 %
Transverse mode TEM00 TEM00
Beam Circularity (%) >90 >90
Beam quality (M2) / <1.2
Beam divergence, full angle (mrad) <1 <2 <2 <1
Beam diameter at the at the aperture (1/e 2 , mm) ~3 ~0.8 ~0.8 ~4 ~2 ~2
Polarization ratio >100:1, Horizontal >100:1, Horizontal
Beam height from base plate (mm) 106 106
Warm-up time (minutes) <20 <20
Operating temperature (℃) 20~30 20~30
Power supply DC 36V/40A（optional） DC 36V/ 40A（optional）
Water Chiller Water Chiller ( 5U-1 ) Water Chiller ( 5U-1 )

Picosecond pulsed laser at 266nm/355nm

Picosecond pulsed laser at 266nm/355nm is made features of short pulse duration, high repetition rate, and good beam quality, which is used in glass marking, sapphire marking, ceramic cutting, semiconductor cutting, solar panelscoating, film scribing, etc.

Specification